School Bus Fleet
MenuMENU
SearchSEARCH

How to Conduct Annual Heavy Maintenance

As each school year winds down, fleets should focus on heavy maintenance — scrutinizing every bus and replacing or repairing worn components. Doing so can prevent breakdowns and avoid liability.

by Brad Barker
July 1, 2009
How to Conduct Annual Heavy Maintenance

 

7 min to read


Another school year has come to an end, and a new year is nearing. The issues dealt with and accomplishments made during the past year will help us prepare for the upcoming year.

I look forward to using new skills and knowledge, then applying what I’ve learned to deal with future challenges. I’ve used the past spring and summer seasons as a time to accomplish heavy maintenance in my fleet. In this article, I’ll provide details on what heavy maintenance entails, how it should be conducted and why it is critical.

Ad Loading...

Heavy maintenance must be performed for any operation to continue to run smoothly, while leaving only minor repairs and routine service work to perform during the bulk of the coming school year.

Heavy maintenance includes inspecting each bus with deep scrutiny, paying attention to every detail on the body and chassis, then replacing, rebuilding or repairing any questionable component that shows any sign of significant wear.

Ensure component reliability
As you visually and physically inspect each item on the bus, keep in mind these two questions throughout the process: Will this component work as it was designed to for another 12 months? Or could this component be the root of a safety-related malfunction or breakdown during the same period?

No one can predict the exact lifespan of a component. However, one can take steps to ensure its extended reliability for a given period. This is accomplished by using good sense while pulling from past histories of known component life to make this prediction.

In the June issue, I discussed the meanings of the term “PM” (proactive maintenance and preventive maintenance). When performing annual heavy maintenance, you are performing proactive maintenance and preventive maintenance. I label the annual heavy maintenance performed in my shop “PM-D”. You may call it anything you wish, but the PM-D, as I will refer to it throughout the rest of the article, is defined as annual safety inspection and repairs and includes all the annual heavy maintenance previously described.

Ad Loading...

I have a checklist I use during this inspection that is signed by the technician performing the work after it is completed. His signature ensures that our insurance coverage will remove us from all risk of liability down the road. Without a signature, date and the completed checklist on record and filed someplace safe, it is as though the work was never performed. If I were to defend our actions in court, having this signed and dated checklist that itemizes all work performed, there is little chance action could be taken against our district, myself or any technician in the shop.

Every PM inspection and repair your staff performs should include an area that is initialed or signed by the technician performing the work, listing the date the work was performed, a full description of all work performed and any observations about the overall condition of any given component that may be of questionable condition.

Again, as I have stated in previous articles, remember the Three Cs in your documentation: complaint, cause and correction.

Inspect, repair, replace
There are two reasons for performing the PM-D. One is to inspect for safety, ensuring every safety-related component on the bus is in reliable, safe operating condition. The other is to repair or replace any component, safety related or not, that is in poor condition or that may be suspect of failing during the next 12 months.

The first part of the PM-D, the safety inspection, is fairly straightforward, and guidelines such as the National School Transportation Specifications & Procedures manual are available. If your fleet shop does not have a copy of this manual, it can be downloaded at no cost from the National Congress on School Transportation at www.ncstonline.org.

Ad Loading...

Within this manual are the national out-of-service criteria for school bus inspectors, which serve as an inspection guide for all bus technicians as well. The NSTSP guidelines should be the base of all safety-related work performed.

Other guides, such as your own state vehicle safety inspection program, the NAS (North American Standard), Federal Motor Carrier Safety Administration Section 396 and the commercial motor vehicle out-of-service criteria are available as well.

The second part of the PM-D, component repair or replacement, includes items of inspection that will reduce the chance of on-the-road mechanical malfunction as well as enhance the overall condition of all body/chassis features and components on every bus. This action restores the overall condition of the bus as near as possible to the condition it was in when new.

There are varying degrees in this second phase of work. I set a goal to perform the highest level that is the most detailed and complete PM as physically and fi nancially possible on my fl eet. You may be limited by some physical or fi nancial restrictions in your district, causing a reduced level of work to be performed. Some say they simply do not have the manpower to perform this type of PM. When I hear that statement, I wholeheartedly disagree. You cannot afford not to perform this PM, regardless of circumstances. Make it work the best you can. You may have to take longer to perform all the work or adjust existing priorities in order to get it accomplished. But it can be accomplished.

Thorough checking
What should be included on the PM-D checklist? I won’t cover every item on my checklist, but I want to explain the types of items one should inspect and give a few examples.

Ad Loading...

This inspection is broken down into specific areas covering the entire bus body and chassis. The body items include all driver controls, driver seating area, windows and glass, seats, etc., as well as all exterior body components.

There are many chassis items included in this inspection. I recommend starting the inspection just as you would a routine service inspection, but extra scrutiny needs to be given to every single item under the bus and on the chassis.

A visual inspection by itself will not suffice here. Feeling, pushing, pulling, shaking and squeezing are required. A component, such as a shock absorber, may appear to be in good working order when looking at it, but when you grab a hold of it and give it a good shake, you may find loose mounts or some other problem. Regardless of popular belief, shock absorbers do need to be replaced every three to five years on average — or sooner if you operate consistently on dirt or gravel roads.

Remember what I said in my last article? When replacing components that have like components mounted elsewhere on the bus, such as shock absorbers, brake chambers, headlights, brakes and so forth, always replace in pairs or sets.

Components that are severely corroded should be inspected closely and very likely will need replacing. This includes aluminum brake valves, chassis cross members, exhaust hangers, exhaust clamps and piping — even steel coolant piping that has become rusted.

Ad Loading...

Electrical connections must be inspected. All battery connections must be removed, and terminals and posts must be cleaned and reassembled, then given a protective coating.

When cables are disconnected from the batteries, take the time to connect a battery tester to each battery individually and test its capacity, and by all means, wash off the batteries and clean out the battery box. If batteries test marginal or bad and multiples of batteries are of the same age, it is wise to replace all of the batteries at the same time. There is always exception to the rule, however, so make sensible decisions on component replacements.

Inspect all chassis ground cables, wires and connectors that are exposed to the elements. Open the electrical junction box. Visually inspect all terminals and connections within. All must be clean and tight. Inspect components that ground internally or have external grounding wires to ensure mounting surfaces, fasteners and wire connections are clean and tight.

Lengthy process
A PM-D, if performed properly, should take eight to 12 hours to complete. It may take much longer, depending on the overall condition of the bus.

If you have not performed an annual inspection and repair before, the first year could be quite time consuming and more costly than you are accustomed to. Regardless of how costly repairs become, you should not cut corners. You will end up spending far more in the long run if you do.

Ad Loading...

If your budget is really tight, divide your fleet into groups by age of bus. Planning will allow you to perform this task on the oldest buses the first year, second oldest the second year, and so forth. But the ideal would be to get all buses on the same annual schedule.

Every effort should be made to perform this type of heavy PM on every bus once a year. You simply cannot ignore it. Planning and scheduling are the keys.

If you feel you cannot accomplish this PM with your fleet, I would be glad to assist in consultation and review of existing maintenance practices and to recommend a plan of action.

For a copy of my inspection checklist, e-mail me at bbarker@pcschools.us, topic “PM-D Checklist.”

Brad Barker is shop manager at Park City (Utah) School District and a member of SBF's editorial advisory board.

Subscribe to Our Newsletter

More Maintenance

DuraMend Refinish Coatings vinyl repair kit in a yellow carrying bin, featuring a heat gun, cleaning solutions, vinyl repair compounds, repair mesh, grain mats, and application tools.
Maintenance•November 2, 2026

Refinish Coatings Launches School Bus Seat Repair Kit

A new all-in-one vinyl seat repair kit comes with color-matched compounds, tools, and supplies to fix tears, holes, and punctures that kids won't be able to pick.

Portrait of John Gonzales of the National Laboratory of the Rockies featured in School Bus Fleet’s “Five Questions” Q&A series.
Maintenance•by Amanda Huggett•November 1, 2026

Easy Ways to Reduce School Bus Emissions: Q&A with John Gonzales

Learn how preventive maintenance, driver training, reduced idling, smarter routing, and the right fuel choices can help districts reduce emissions — without investing in new buses.

Automotive technician handling a large tire and wheel assembly beside a Ranger DST30PX wheel balancer and tire-changing equipment in a professional repair shop.
Maintenance•October 16, 2026

BendPak Launches Ranger DST30PX Wheel Balancer

BendPak's new wheel balancer handles tires up to 43 inches in diameter, with a reinforced design, precise weight placement, and faster service cycles.

Ad Loading...
School bus maintenance garage with several yellow buses undergoing service, mechanics working in repair bays, and overhead equipment. Graphic reads “A Better Garage, All Year Long” with the School Bus Fleet logo.
Maintenance•October 14, 2026

Tips for Ensuring School Bus Garages Are Safe and Warm Year-Round

Cold maintenance bays and rising heating costs? Learn how school bus garages can improve comfort with targeted heating, better airflow, and winter preparation.

Graphic featuring a close-up of a yellow school bus with the headline “ASE's 7 School Bus Technician Certification Tests: What to Know.”
Maintenance•by Staff and News Reports•October 8, 2026

ASE Highlights School Bus Technician Certification Requirements

ASE is encouraging school bus maintenance professionals to maintain their certifications, highlighting seven specialized tests and five-year renewal requirements.

Fleetrite logo displayed against a light background with a blurred close-up of a vehicle in the upper right corner.
Maintenance•by News/Media Release•October 1, 2026

International Adds E-Commerce Capabilities to Fleetrite.com

IC Bus customers can now browse, buy, and track shipments for more than 400,000 aftermarket parts online.

Ad Loading...
Graphic featuring several yellow school buses with the headline, “The Most Expensive School Bus Resale Mistake,” and images representing maintenance, auctions, and resale value.
Management•by Steve Mitchell•October 1, 2026

The Most Expensive Thing You Do Before Selling a School Bus: Wait

When should you sell an aging school bus? Learn how maintenance, mileage, corrosion, specifications, and timing can affect resale value long before the auction.

Graphic showing a DEF header beside the text, “Better DEF Header Technology Can Mean Fewer Repairs.”
Maintenance•September 18, 2026

The Evolution of DEF Header Technology: What School Bus Operations Should Know at Replacement Time

See what school bus fleets should consider when replacing DEF headers to improve reliability, reduce repeat repairs, and control maintenance costs.

The Essential Guide to School Bus Fleet Maintenance
Sponsored•September 8, 2026

The Essential Guide to School Bus Maintenance and Student Safety

Your district's buses carry students to school every day. This guide shows how predictive maintenance powered by fleet data helps keep buses reliable, drivers accountable and students safer from the first bell to the last stop.

Ad Loading...
School buses at a Southeast Michigan facility illustrate Kerry Brothers’ growing regional maintenance network following its acquisition of Downriver Truck and Bus.
Maintenance•by Amanda Huggett•August 11, 2026

Kerry Brothers Grows Michigan School Bus Repair Network

The acquisition of Downriver Truck and Bus expands Kerry Brothers’ school bus maintenance footprint across southeast Michigan, adding repair capacity, diagnostic resources, and state inspection support.