i have this 2010 vision hydro brakes it broke a brake line repaired that now i cant get any pressure from right rear i am using pressure bleeder at first i had pressure into the abs module and not out the the right rear si i blew some compressed are int the port and turned on pressure bleeder and i had flow put all back together went to right rear noe i have a little flow but not good again i have good flow out of master into the module low flow out of abs module going to right rear all rest are good any ideas other then it needs an abs module
In the automotive field you need to use a scan tool to set the abs to bleed. Not sure of BB's manufacturer, just worth a look into may be nothing wrong with ABS.