| Author |
 Topic  |
|
|
dsalinas1939
Top Member
USA
1324 Posts |
 Posted - 09/07/2016 : 10:53:36 AM
|
| i have a 2016 c2 right rear red school light not workin there is no power to blb any ideas |
Edited by - dsalinas1939 on 09/07/2016 11:12:49 AM
|
|
|
RonF
Top Member
867 Posts |
Posted - 09/07/2016 : 11:20:40 AM
|
| I don't have any C2's but my guess is going to be somewhere between there and the body controller. |
US Army retired CMBT |
 |
|
|
dsalinas1939
Top Member
USA
1324 Posts |
Posted - 09/07/2016 : 11:27:50 AM
|
| the service link program is not working to i cant see if there is a signal coming from the control and also the red warning light light on left hand console flashes i believe it is suppose to stay on solid |
|
|
|
Fastback
Top Member
1500 Posts |
Posted - 09/07/2016 : 11:33:23 AM
|
If I am correct on my C2 multiplexing, the body controller switches on and off the ground, constant power should be there when key is on.
You could check another light thats functioning correctly to be sure.
If you have no power look for a supply problem, anything else not working? Check the fuses. |
Why yes, the ORIGinal CHARGER is a Fastback |
Edited by - Fastback on 09/07/2016 11:45:28 AM |
|
|
|
dsalinas1939
Top Member
USA
1324 Posts |
Posted - 09/07/2016 : 12:03:29 PM
|
| the ground isalways there tho body controller sends the voltage everything else works just the RR red school light does not |
|
|
|
baptistbusman1
Senior Member
USA
175 Posts |
|
|
dsalinas1939
Top Member
USA
1324 Posts |
Posted - 09/08/2016 : 10:08:43 AM
|
| that link brought me to another list not sure what u where tryin to show me |
|
|
|
baptistbusman1
Senior Member
USA
175 Posts |
Posted - 09/08/2016 : 10:47:03 AM
|
| Oh, that link it to my old posts. What you need to look for is the computer module located under your switch panel. Maybe switch it with another bus and see if that corrects the problem. |
I was formally Baptistbusman. However, I lost my password, and had not updated my email address.
Here is a link to my old posts. http://www.schoolbusfleet.com/forum/search.asp?mode=DoIt&MEMBER_ID=1846 |
|
|
|
dsalinas1939
Top Member
USA
1324 Posts |
Posted - 09/08/2016 : 11:54:19 AM
|
| problem is its a brand new bus 1000 miles on it so dont wanna dig that far into it was hopen for a fuse or something but i no everything goes three that switch hub so i am guessin its a wire or bad hub didnt wanna send it to dealer cause sometimes it takes forever |
|
|
|
baptistbusman1
Senior Member
USA
175 Posts |
Posted - 09/08/2016 : 2:11:53 PM
|
| Oh, that link it to my old posts. What you need to look for is the computer module located under your switch panel. Maybe switch it with another bus and see if that corrects the problem. |
I was formally Baptistbusman. However, I lost my password, and had not updated my email address.
Here is a link to my old posts. http://www.schoolbusfleet.com/forum/search.asp?mode=DoIt&MEMBER_ID=1846 |
|
|
|
dsalinas1939
Top Member
USA
1324 Posts |
Posted - 09/09/2016 : 05:01:10 AM
|
| i finally got my service link going and there is a code in the switch hub module 2033 this is my first time usinf service link so not to sure how to navigate and see if the module is comanding the light on |
|
|
|
dsalinas1939
Top Member
USA
1324 Posts |
Posted - 09/09/2016 : 12:09:57 PM
|
| found the problem wire rubbing under the switch hub i really wish they would use wire loom it would save so much headache |
|
|
|
Thomasbus24
Administrator
USA
4546 Posts |
Posted - 09/09/2016 : 12:38:15 PM
|
| Yeah, but it would add $0.25 to the manufacturing cost and we cannot have that! |
|
|
| |
Topic |
|
2016 c2 school light
