School Bus Fleet Magazine Forums
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 Professional Garage
 Enter Forum: Professional Garage
 What to use on slack adjusters		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

DougBier
Senior Member

78 Posts
Posted - 03/25/2014 :  10:02:15 PM  Show Profile  Reply with Quote
I haven't done but a handful of automatic slack adjusters. I had to replace the air can and that meant removing the clevis . Well I removed thses things that looked like safety pin . When I reassembled everything I used cotter pins instead of reusing what I removed . Is this okay ? Any reason not to use cotter pins or should I have tried to reuse what I took off ? Thanks

Fastback
Top Member

1500 Posts
Posted - 03/26/2014 :  04:10:54 AM  Show Profile  Reply with Quote
Cotter pins are fine. The style pins you removed are likely used by the OEM because they are more assembly line friendly.
Why yes, the ORIGinal CHARGER is a Fastback
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
 


School Bus Fleet Magazine Forums © 2022 School Bus Fleet Magazine Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000