DD inc.
New Member
4 Posts |
Posted - 12/27/2009 : 07:00:39 AM
|
I've been trying to track down wiring schematics/info on the following bus Body S/N B092745. Engine would not start, until I installed my 70 pin bypass harness. I found a blown 40a maxi fuse, i replaced it, only to find a short to ground.I noticed after running, the alt charge post was melted to the alt case. I removed the wire and replaced the fuse, it was ok. I should add that there doesn't seem to be any power to the shift console, as the trans will not go into gear. I put in almost every wire back in the 70 pin OEM plug, but still no movement.I replace the alt, only to find it melted the charge post almost immediately. There is also a 10a acc circuit breaker in the fuse panel that seems to have a short, but not sure what it powers? trans maybe? If anyone can help, that would be great!! I tried the Bluebird site with the body s/n to no avail. |
|