School Bus Fleet Magazine Forums
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 Professional Garage
 Enter Forum: Professional Garage
 2014 IC (International) Entry door problem
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

bucksgarage
Active Member

17 Posts

Posted - 01/24/2020 :  04:37:03 AM  Show Profile  Visit bucksgarage's Homepage  Reply with Quote
I have a 2014 International CE bus with a wild door problem. First, the door is air powered, and it has a mind of its own. It will open when the rotary switch is in the closed position, and sometimes close with the switch in the open position. After it closes or opens on its own, the switch can be turned either to open or close, and all that happens is the relays click in the circuit panel, nothing else. The open/close switch is on the left dash panel with the normal/emergency switch above the entry door. I've checked the main switch, spool valve/solenoids, and all related items, still with no success. Any ideas where to look next?

2014 International CE
Maxxforce 7
Allison 2500PTS
Air Brakes
PED-LOK Brake system

bucksgarage
Active Member

17 Posts

Posted - 01/24/2020 :  2:07:15 PM  Show Profile  Visit bucksgarage's Homepage  Reply with Quote
Found the issue for this, a pinched wire behind the front bumper for the student gate. Gate itself was removed, actuator and wiring stayed behind. Thank you for at least looking at this post.

Edited by - bucksgarage on 01/24/2020 2:07:52 PM
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
 


School Bus Fleet Magazine Forums © 2022 School Bus Fleet Magazine Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000