i am getting a code 2387 vgt incorrect stop limits or vgt unable to move i was told the turbo could be gummed up is there a way to clean it without taking it off???? its a 2010 bluebird vision 6.7
where do u put that stuff i cant find a video to show u what u do with it
It's a machine you use and hook up to different spots on different engines.
The cummins hooks into the egr crossover tube. It's a preventive tool and may not unstick what you have, but will help keep it from happening in the future.
Most VGT problems we have encountered has been been defective VGT actuator have had a few wring issues also. last 1 8" of harness was bad coming from ecm on 12v wire. Make sure you follow procedure to put VGT actuator back in if you take apart
One reason why actuators fail is because of stuck trubo vanes. The ECM tell the actuator it needs 100% but the vanes move less than that, so the ECM hammers more voltage to the actuator until one day it over heats.
i canttake it apart its been replaced only a month ago with a jasper one they told me to try and clean it or they will send me a new one so i really dont wanna take it off again so i am tryin to figure out how to clean it without buying a 4000 dollar machine
I'm using a similar tool made by terraclean, there are many different copy's of the same tool on the market all that are made by the same company. I have been doing the EGR cleaning now for five years as a annual maintenance, my turbo/EGR issues are now non existent. I believe most people should be able to purchase the Motor Vac branded tool and chemical at a local parts store.