hi guys plunger was in oil pan,what an experience that was.put new pump in got new grommets and fuel line,having trouble getting fuel line nut started on the back of motor under the exhaust pipe,is there a trick to this or is it just gonna be tough
I remove the valve on the front of the turbo pedistal and the engine lifting bracket and you will be able to get right in there with your hands . I also recomend removing the 3 line clamps from the fuel lines to the fuel pump as they usually saw through one of the pipes when they slide down. Im not sure of the logic behind the clamp if it causes a failure.
t444e fuel pump
Posted - 12/03/2012 : 11:56:48 AM
