Author |
Topic |
|
peter2019
Senior Member
125 Posts |
Posted - 11/09/2019 : 04:32:16 AM
|
Hi, any ideas for how to program IDM on DT466 international, deal won't do it unless buy part from them which selling me at $1500, and I got from Ebay at $300 already, I have software MD32 DLC( Diamond Logic Controller) which has program on menu, does it works? Thanks |
|
Dvorak
Senior Member
United States
95 Posts |
Posted - 11/11/2019 : 03:58:17 AM
|
No programming needed for the IDM, just plug it in. |
|
|
peter2019
Senior Member
125 Posts |
Posted - 11/11/2019 : 04:58:14 AM
|
I bought IDM from Ebay for 2006 international school bus DT466 engine, it's for Ford, but the part number is same as my old one-1845117C5 anyway, cannot find out anywhere selling IDM for international except dealer, I guess they are using same, and seller said it will fit, after install, the bus doesnot start, scan tool read ECM and IDM are incompatible, now seller said it need program... |
|
|
Gearbox
Senior Member
USA
53 Posts |
|
peter2019
Senior Member
125 Posts |
Posted - 11/11/2019 : 2:49:09 PM
|
No, Gearbox, it doesnot help, actually I replaced with Dorman 904-229(bottom board) already just want to try to solve my problem, but it didnot, it still happened same, quit randomly, replace all harness didnot work, need replace whole IDM. |
|
|
Bluenozer
Top Member
Canada
640 Posts |
Posted - 11/12/2019 : 02:21:43 AM
|
INKAL is what you need to program ECM's DLB can only program ESC controllers or build ladders for custom applications |
OEM trained in wiring and all engine platforms for over 20 years
|
|
|
peter2019
Senior Member
125 Posts |
Posted - 11/12/2019 : 05:56:16 AM
|
Hi Bluenozer, Thank you for reply, but I donot need program ECM, my DT466 IDM faulty, I bought the same part number of IDM, but bus doesnot start and said ECM and IDM are not compatible, so I guess I need to program IDM, the ECM should be same as original one, Thanks |
|
|
Bluenozer
Top Member
Canada
640 Posts |
Posted - 11/12/2019 : 08:24:40 AM
|
IDM needs to be flashed with IH parameters ( it would have Ford parameters in it now) serial numbers, blah,blah so thats why it comes up incompatible |
OEM trained in wiring and all engine platforms for over 20 years
|
|
|
peter2019
Senior Member
125 Posts |
Posted - 11/12/2019 : 5:10:45 PM
|
Thank you, Bluenozer, so how to flash IDM then? |
|
|
57fan
Senior Member
United States
148 Posts |
Posted - 11/13/2019 : 12:33:38 AM
|
If you replaced the complete IDM assy then it needs to be programmed by an International dealer. They need to connect the IDM/ECM to the plant in Chicago that has all the info. I know of no other way possible to complete this. in 15 years we have never had an IDM assy fail. The bottom board is a different story. That you just replace the board and good to go. have also never heard of IC or International dealer requiring you to buy the IDM form them..
let us know how you get it programmed. |
Lead, Follow or get out of the way! Thomas Paine |
|
|
Bluenozer
Top Member
Canada
640 Posts |
Posted - 11/13/2019 : 02:44:48 AM
|
goto dealer or google search INKAL and install a pirate version with data access |
OEM trained in wiring and all engine platforms for over 20 years
|
|
|
peter2019
Senior Member
125 Posts |
Posted - 11/13/2019 : 04:59:16 AM
|
Ok, Here is my problem, DT466 intermittent shut off while driving, no warning no loss power, just quit like turn key off, cannot restart unless switch another relay or supply power bypass reply, then drive back put old relay back, normal again like nothing happened, replace everything (more than 10 relays, fuse, harness, even IDM bottom board)except IDM itself left. |
|
|
Bluenozer
Top Member
Canada
640 Posts |
Posted - 11/13/2019 : 08:22:54 AM
|
big key chain(heavy) had one it was worn out ignition itself the key chain has only the key on it now no issues it did have a bunch of junk on it before |
OEM trained in wiring and all engine platforms for over 20 years
|
|
|
peter2019
Senior Member
125 Posts |
Posted - 11/13/2019 : 7:08:24 PM
|
You mean you think it was ignition problem? Bluenozer? |
|
|
Bluenozer
Top Member
Canada
640 Posts |
Posted - 11/14/2019 : 02:36:14 AM
|
had one bus where she had toys and crap hanging on key chain keep on blowing electrical system fuse chased all wires and all were good exchanged ignition and got rid of her stuff off of key chain and no issues since
|
OEM trained in wiring and all engine platforms for over 20 years
|
|
|
|
Topic |
|