| Author |
 Topic  |
|
|
peter2019
Senior Member
125 Posts |
 Posted - 04/29/2019 : 09:06:11 AM
|
| Hi, anybody has idea why my 2006 international school bus DT466 engine ABS light stay on, no computer to detect, any easy way to figure out? couple sister buses same problem. Thanks |
|
|
Bluenozer
Top Member
Canada
644 Posts |
Posted - 04/29/2019 : 09:26:04 AM
|
you mean no laptop to hook to bus or when hooked up it finds no ecm, if it does not find the abs ecm its a power or ground issue if nothing is being detected then check your power,ground, etc at the diagnostic plug without hooking up you can use the blink code button under dash and google the results
|
OEM trained in wiring and all engine platforms for over 20 years
|
 |
|
|
peter2019
Senior Member
125 Posts |
Posted - 04/29/2019 : 9:10:56 PM
|
| I mean no laptop to hook up bus, Bluenozer, actually I have MD32DLC(diamond logic controller) software, but I donot think it can work for ABS system, please help |
|
|
|
unclefish
Senior Member
113 Posts |
Posted - 04/30/2019 : 03:23:32 AM
|
tone ring or one of the sensors.
Bendix acomm is a free download to laptop. if you have connector for bus
watch some you tube videos on how to test sensors.
I think back in the day we had a tool to plug in to bus and it would at least blink witch wheel was the problem |
|
|
|
Bluenozer
Top Member
Canada
644 Posts |
Posted - 04/30/2019 : 03:25:53 AM
|
| does it have the ABS blink code button under dash by the diagnostic connector or by steering shaft under shaft |
OEM trained in wiring and all engine platforms for over 20 years
|
|
|
|
peter2019
Senior Member
125 Posts |
Posted - 04/30/2019 : 3:37:27 PM
|
| Bendix acomm is a free download, but not free use? after I download, it required license key, what's trick? |
|
|
|
Bluenozer
Top Member
Canada
644 Posts |
Posted - 05/01/2019 : 02:47:49 AM
|
You just have to email them for a key it is still free but now you need a key to run program
Heres the key they gave me not sure if it will work with your download it takes them a day to get back to you
64P3CF312 |
OEM trained in wiring and all engine platforms for over 20 years
|
|
|
|
unclefish
Senior Member
113 Posts |
Posted - 05/01/2019 : 03:05:59 AM
|
| they will email you a key usually within 1 day . check your junk email that's where mine went. |
|
|
|
peter2019
Senior Member
125 Posts |
Posted - 05/01/2019 : 7:22:18 PM
|
| Thanks guys, got key, but not sure what ECU should connect, use auto detect ECU, found ECU:TPMS, Protocol: J1939, but after launch, got "ECUtalk platform error, what's wrong? Thanks |
|
|
|
unclefish
Senior Member
113 Posts |
Posted - 05/02/2019 : 03:30:42 AM
|
being an older bus might be 1708 not 1939 choose some other options till you find it
|
|
|
|
peter2019
Senior Member
125 Posts |
Posted - 05/02/2019 : 05:31:17 AM
|
| HI unclefish, I got one ECU: TPMS by auto detect, but got "ECUtalk platform error", donot know what should to do next, how can I get fault code for ABS? |
|
|
|
peter2019
Senior Member
125 Posts |
Posted - 05/02/2019 : 07:21:33 AM
|
| Just notice my connector to bus is J1708, but Bendix acomm is J1587 or J1939, what I should do? Thanks |
|
|
|
Bluenozer
Top Member
Canada
644 Posts |
Posted - 05/02/2019 : 08:33:01 AM
|
| when you pick your communication device you should be able to pick j1939 |
OEM trained in wiring and all engine platforms for over 20 years
|
|
|
|
slippert
Top Member
USA
630 Posts |
Posted - 05/02/2019 : 09:11:29 AM
|
2006 IC The bend ix brain box on frame rail should have a row of lights on back side to tell you voltage(at top green light) then a row of lights coming down to say if it's a sensor and left or right side... can't remember if it tells steer axle and or drive? but has like 10 to 12 lights coming down rear of brake ecm.... once problem is fixed you can clear codes/reset (turn off light) with magnet at top or bottom of light row...
I never used computer software for the older ones.... either used above info or the BX801869 adapter in 9 pin if I felt like crawling under dash instead of bus..lol |
|
|
|
peter2019
Senior Member
125 Posts |
Posted - 05/03/2019 : 06:28:42 AM
|
| Thanks, guys, check four ABS sensors, got one bad, replace it, working so far, still didnot know how to use computer to diagnose yet:) |
|
|
| |
Topic |
|
DT466 ABS light stay on
