| Author |
 Topic  |
|
|
Elliot
Senior Member
USA
54 Posts |
 Posted - 04/22/2019 : 4:34:24 PM
|
A faithful 1994 BB TC2000 Forward Control needs its turn signal switch replaced, and I cannot even figure out how to remove the "knob" with the horn button in it.
The notches or fluting suggests... simply gripping it with a hand and twisting.
But there are more notches than I have fingers on one hand, so maybe my logic is off.
I am perfectly competent with steering wheel pullers and that sort of thing, but I cannot even get started on this job. 
 |
|
|
40ngone
Senior Member
USA
166 Posts |
Posted - 04/22/2019 : 5:20:11 PM
|
| The knob as you call it, is not to be removed. Just put a pocket screw driver between the knob and the center rubber piece, which is the horn contact button. The contact button will lift out. |
 |
|
|
Elliot
Senior Member
USA
54 Posts |
Posted - 04/22/2019 : 10:26:40 PM
|
Four decades of wrenching, and I'm still "too gentle" -- always worried I'll scratch something that didn't need to be scratched, even on a muddy old workhorse like this. LOL
Of course, this is a BELOVED muddy old workhorse.
And of course, as you say, the button lifted right out.
Thank you for taking the time to assist me, Sir! |
Elliot
1992 Bluebird TC2000 FE, 5.9, MT643 |
|
|
|
40ngone
Senior Member
USA
166 Posts |
Posted - 04/23/2019 : 04:33:36 AM
|
| Your very welcome! We are all in the same game. |
|
|
| |
Topic |
|
1994 BB TC2000 FC horn knob removal?
