can anyone tell me how or where the relay is for the vandle lock switch on the back door i am having a very intermitten no stort an today i was playing wityh the slide lock on back door and it start few times then wouldnt start again then i went to back door and slide lock back and fourth again and it started a couple times then didnt but how does that circuit work i cant find anything on it i have all powers and grounds to body module when i i try and stat and it wont i have my ground coming in from key i have power from neutral saftey but nothing coming out of module to starter relay i am thinking its on the vandle lock side but cant find anything
I can't find any wiring diagrams for this system, went out to a 2019BB bus and the buzzer goes off when this is locked at the rear door do you have the buzzer going off also
OEM trained in wiring and all engine platforms for 20 years
yeah its wierd the buzzer goff when its locked but the bus wont start if i go and lock and unlock the back door lock a few times real fast go up front the bus starts right up i let it sit for ten minutes it wont start again i go to back lock and unlock that lock real fast go to front bus starts right up i replaced the relay in the back under that cover just to make me feel better but that did nothing i am thinking some how by locking and unlocking it its sending a ground shock to chassis module and making it work wondering if the module is bad but i ohms all the wires at chassis module to the signal from back door and found nothing i am pulling what hair i got left out