Maintenance

Stertil-Koni Brings Continuous Recess System to Piston Lift

Posted on August 2, 2017
Stertil-Koni’s Continuous Recess system is now available on the in-ground telescopic piston Diamond Lift.
Stertil-Koni’s Continuous Recess system is now available on the in-ground telescopic piston Diamond Lift.

STEVENSVILLE, Md. — Stertil-Koni’s Continuous Recess system is now available on the company's in-ground telescopic piston Diamond Lift.

The Continuous Recess system was originally designed for Stertil-Koni’s in-ground, full-rise scissor Ecolift. According to the company, the system helps save time and boosts safety and convenience for maintenance technicians.

With the Diamond Lift, the Continuous Recess unit allows the bolster to recess flush to the floor anywhere in the horizontal range of piston travel. The bolsters remain completely flush with the floor, which facilitates lift setup, minimizes the possibility of hitting the lift with the vehicle, and reduces tripping hazards, according to Stertil-Koni.

“The Continuous Recess moveable lifting unit in the Diamond Lift is an industry first for piston-style lifts,” said Jean DellAmore, president of Stertil-Koni. “This innovative engineering enhances the Diamond Lift — popular because of its optimum flexibility, productivity, durability, and environmental containment.”

The Continuous Recess system’s flat pit covers are made from anodized aluminum and are equipped with a skid-resistant surface. The system provides full drive-over capacity of 13,500 pounds.

The Diamond Lift has a lifting capacity of up to 35,000 pounds per piston, or a total of 105,000 pounds in the three-piston configuration. It is available in two versions: “cassette” and “frame.” The lift is designed to accommodate vehicles with extremely low ground clearances.

Related Topics: preventive maintenance, shop safety, vehicle lifts

Comments ( 0 )
More Stories
Product

Workshop Management Tool

Chevin Fleet Solutions’ Workshop Hub, when fully launched in early 2019, can be used as a central location for technicians to complete daily administration tasks such as time sheets, inspection sheets, and workshop audits from the workshop floor.

Product

SOS Alert Device

The Mobile Defender – Model S is a small device that employers can give to employees to use as a panic button during their shifts.

VAT runs a fleet of 80 school buses in Ohio.
Article

Contractors Connect on Recruiting Strategies, Fuel Outlook

Four school bus operators from four states find common ground in dealing with driver shortage, tapping into the benefits of GPS and video cameras, and assessing fuel options. For the most part, they’re sticking with diesel for now, but one is seeing success with an electric bus.

Product

Heat Recycling System

Idle Free Heat uses residual heat from the engine to keep the interior of the bus warm, circulating the heat through the vents when the bus is turned off.

Be the First to Know

Get the latest news and most popular articles from SBF delivered straight to your inbox. Stay on top of the school bus industry and don't miss a thing!