Author |
Topic |
|
tkorpal
Active Member
28 Posts |
Posted - 07/20/2015 : 07:15:17 AM
|
i have a 2012 IC CE with a dual pane drivers window, this is the only bus i have seen with this window. its fogging up like your house windows do when the seal is broken. our buses age out on warranty so it's out of warranty. i was just wondering if anyone out there has seen this. thank you. |
|
Kodie
Top Member
United States
2028 Posts |
Posted - 07/21/2015 : 5:50:08 PM
|
Our 2010's have this option and my bus actually which is a '10 within the last week has had this issue. It's been fine and it seems suddenly the seal was broken and now it's fogging up pretty bad. Almost every single one of our 2010 and older IC's are doing this in the door panels, and the passenger window by the door side which is also dual pane. Definitely not a problem unique to your buses. |
|
|
bfaulkner
Senior Member
168 Posts |
Posted - 08/04/2015 : 12:23:13 PM
|
We have many ICs that did this. we had all the glass in our drivers windows and student doors replaced with standard single pain glass. the local glass company did it for us and made the proper seals. |
|
|
Kodie
Top Member
United States
2028 Posts |
Posted - 08/05/2015 : 7:30:51 PM
|
The problem with doing that is that you're eliminating the reason for the thermo-pane glass in the first place, that being visibility. I can't tell you how many times I'm coming out onto a road at a strange angle, need to look over my right shoulder and the windows are so fogged up from the kids breathing (how dare they) I have to ask them to clear the window for me. The dual pane glass is nice because as long as the seal doesn't break, it won't fog. It's a shame they can't just engineer this stuff to last. |
|
|
bfaulkner
Senior Member
168 Posts |
Posted - 08/06/2015 : 08:11:08 AM
|
We have not had any drivers complain that it fogs from the kids more. of course if it is your preference to keep it dual pane then it can be bought but it is expensive.
Another idea is Rain-x anti fog. It does work but has to be reapplied every month. we tried it a bit but found it a hassle and it became a driver responsibility. |
|
|
Fastback
Top Member
1500 Posts |
Posted - 08/06/2015 : 09:44:21 AM
|
In Iowa, we are required to have thermopane windows in the drivers window and upper entrance door windows PLUS any windows in front of entrance door or drivers window (examples; transit bus, bus on cutaway van chassis or Thomas C2). |
Why yes, the ORIGinal CHARGER is a Fastback |
Edited by - Fastback on 08/06/2015 09:45:38 AM |
|
|
Cal Mc
Advanced Member
303 Posts |
Posted - 08/22/2015 : 8:52:35 PM
|
To meet the D250 standard (the standard that school buses must meet) we are required to have thermal panes in all door glass, drivers sash windows, first passenger windows on left side and first two windows on the right side. 63 buses in our fleet and we have had to change at least 30 thermal glass units in the past two months (We do not operate in June and July. To change the thermal units in the International buses we have found it easier to disassemble the units in the frame. |
|
|
dwight
Senior Member
USA
58 Posts |
Posted - 08/28/2015 : 01:55:38 AM
|
Believe it or not - Bluebird had the double glass option available since 1963. The entrance door had a rubber window molding with two channels. One glass was installed from the inside and the second glass installed from the outside with the rubber locking strip on each side. The side top and bottom sash windows had a one piece storm window that was installed for the winter on the outside of the bus window and held in place with two pieces of sheet metal and screws.
Starting in 1964, the sealed double glass window became an option and now 51 years later you still have the problem and expense with moisture between the glass.
I ordered every type C and D school bus with 11 double glass windows in each bus starting in 1963. At the first sign of moisture we removed and cut the glass apart and removed all sealer and have the clean glass resealed at a local glass company that reseals double glass windows one day each week. They use the latest and best process available at a present day cost of less than $50 per window.
By having a couple extra window units in your parts inventory you can swap out the bad windows without having to lay up the bus. The important part is to remove, clean and reseal the window before the moisture etches into the glass. |
20 SCHOOL BUS FLEET OWNER/OPERATOR (Retired) |
|
|
|
Topic |
|