How do you reset the oil change msg on 2014-2015 IC with cummins engines. I don't have insite yet and the reset procedure that my dealer emailed me didn't work either. Thanks
1.Set the Parking Brake 2.Turn the Ignition Key On 3.With the dashlights still illuminated and once the voltage gauge reading battery voltage; begin the reset sequence below
1.Turn the cruise switch ON (If performed too soon the light on the switch will not illuminate) 2.Turn the crusie switch OFF 3.Turn the crusie switch ON 4.Rapidly push the RESUME switch four times and then hold on the 5th depression for four seconds 5.The "Change Oil" message should appear or flash in the odometer window 6.Start the engine 7.Key off, allow the dash display to shut down (15 seconds) 8.Key on, the Change Engine Oil Service Interval message should clear
1. Turn key to on position 2. Release the service brake pedal 3. Depress the throttle pedal and hold at 100% 4. Press and release the service brake pedal 3 times 5. Release the throttle pedal 6. Press and release the service brake pedal 1 time 7. Depress and hold the throttle pedal at 100% throttle again. 8. Press and release the service brake pedal 3 more times. 9. Release the throttle pedal 10. Press and release the service brake pedal 1 time. 11. The appropriate lamp will flash 3 times. 12. Turn key to off position
Well tried that one also didnt work for me so after working with my IT guys trying to get insite for 3 weeks i just got it myself and turned oil change off....