msharp63
Active Member
USA
17 Posts |
Posted - 09/05/2018 : 08:29:42 AM
|
I have a 2006 Thomas bus with hydraulic brakes, I had to replace the brake booster, I have bleed all the lines, however there is no power to the brakes, when we press them they are hard and have no power behind them, the backup pump comes on as it should. With the motor running I crack the pressure line from the power steering pump and get fluid, but not at alot of pressure, it just runs out with no pressure. The power steering works fine.
Any ideas Thanks Mike |
|