We have a new customer with 2012 ce school bus maxforce 7. Does his own mait and just got bus. His change oil message is on dash. Found procedure , park brake on, key on engine off, cruise switch then on, off then on. Then push resume 5 times holding on last time for 4 seconds. message should go out. Does not seem to be working , is there something we are doing wrong? Input welcome. Thanks Roger.
Park brake on, key on engine off. when volt gauge is between 12 and 14, then press cuise. You may also need to hold the resume longer the 4 seconds. Also you have only about 10 seconds to do all this.
2012 ce bus oil reset
Posted - 11/14/2017 : 08:46:35 AM
