The Solenoid will not close upon turning the key to accessory position. I have 12v on the one post as it should once the key is turned the solenoid should close, however it does not. If I tap it with a hammer or wrench it will close. Has been replaced twice and still no go.
Are you checking the voltage with a dvom or a test light. It seems to me like you have a voltage drop somewhere or loose connection or a faulty or loose ground wire.
Brian Prochazka Bedford City Schools Transportation Specialist
u can use a power probe or a jumper wire and power up the small terminal to see if it closes if it does then u no u have a voltage problem if it doesnt u have a ground problem