Can anyone tell me which mark to use to find TDC on a 2008 (2007 epa) Maxxforce DT? There are 4 holes drilled in the balancer and a pin looking thing on the crank pulley. I haven't had any luck finding it on ISIS. Thanks.
Mine that vintage all have a stationary TDC arrow/mark on front cover and a machined notch on the crank pulley next to the front cover that line up for TDC, as you rotate it around
Ok, I will check that out. I saw the mark on the front cover, but did not see a notch on the pulley. I will double check this though. Thanks for the info.
Maxxforce DT TDC
Posted - 08/27/2015 : 1:28:50 PM
