Subscribe Today

March 12, 2010  |   Comments (6)   |   Post a comment

Tire Maintenance Best Practices

Officials at tire companies, along with technicians, say that checking for proper inflation, axle alignment and tread depth helps keep tires in good condition. They also provide tips on mounting, inspection, repair and replacement.

by - Also by this author

SHARING TOOLS   | Email Print RSS Page 1 of 2 »

Ensuring that the tires on a fleet of school buses are in good condition should be an essential component of an operation’s maintenance program for the buses to run smoothly.

“Every school district or bus fleet should have some kind of tire management program,” says Doug Jones, customer engineering support manager for Michelin Americas Truck Tires. “A good program includes cradle-to-grave tracking, analysis, preventive maintenance and more.”

Industry professionals offer numerous tips specific to tire maintenance, touching on inflation and pressure, axle alignment, tread depth and mounting. They also offer insight on how often tires should be inspected and signs that a tire needs to be replaced or repaired.

Taking into consideration this information will equip both drivers and technicians with the knowledge to help prolong the life of a tire and avoid problems when buses are on the road. 

Establish proper inflation and pressure

Determining whether tires are properly inflated is the first item technicians should check for. Scott McNamara, a trainer for Bridgestone Bandag Tire Solutions, says that the air pressure of all tires should be checked and corrected weekly with an accurate inflation pressure gauge.

“Tire pressure should be checked while the tires are cold,” he adds. “Do not bleed air from tires while they’re hot as this will result in under inflation. Operating on an improperly inflated tire will create severe tire damage.”

Thomas Kenny, manager at Hankook Tire America Corp., elaborates, saying that improper tire inflation can result in shorter tread life, irregular tread wear and degraded durability, along with decreased fuel economy and degraded vehicle handling.

Moreover, Timothy Miller, senior marketing specialist for Goodyear Tire & Rubber Co., notes that the pressure in tires should be kept at a level that will support the load that the bus is carrying.

Officials at Double Coin suggest reviewing a bus’ owner’s manual or the vehicle load and tire information placard. These items provide data on the weight of the vehicle and the standard load, helping to determine the air pressure level.

Monitor axle alignment and tread depth

Miller says that attention should also be given to a bus’ axle alignment. If tires come in contact with curbs with the potential to knock the axles out of alignment, the alignment should be checked at each tire change. Steer axles should be checked for proper camber, caster and toe settings. Drive axles should be checked to determine whether they are perpendicular to the chassis’ centerline so that the bus will travel straight.

“Technicians should establish a minimum tread depth allowed before tires are changed,” Miller adds. “This could vary from location to location. Buses in northern Michigan might require deeper tread depths to travel in snow and slush, but buses in Miami might be able to run until the tread is down to 4/32nds without any problems.”

Avoid mixing tire types, brands

Manufacturers and technicians also have suggestions for mounting tires on a bus. Officials at Double Coin and Brad Barker, shop supervisor at Park City (Utah) School District, both caution against mixing tires. “Try to match brands, types and tread designs on each axle and avoid mixing tire brands and types. Each tire has its own flex characteristics,” Barker explains.

John Whelan, heavy-duty mechanic/lead hand at School District #73 in Kamloops, British Columbia, offers specific advice on dual tires, saying that these tires should be the same size and have the same tread pattern.

“Irregular duals will cause one tire to work harder and heat up, causing premature wear and possible failure on the highway,” Whelan says. “A rule of thumb is that the diameter of both tires must not have more than half an inch difference, while there should be no more than a three-fourths inch difference in the circumference of the two tires.”

PAGE   12Next

Post a Comment

Read more about: tires/wheels

Request More Info about this product/service/company


aj    |    Jul 04, 2014 09:28 AM

When changing out OEM tires for nonOEM larger tires , is there some official language to follow on tire pressures to go by other than the side wall? Typically the oem tire specs would be on the vehicles door jam and that is fine, but what is one to follow when larger nonOEM tires are exchanged and the tire (max cold)pressure on the side wall for example reads 80 psi cold. Should the recommended psi for the vehicle still be what the door jamb label recommends?

paul    |    Jan 06, 2011 02:41 PM

I wanted to thank you foryour help. 1-863-632-1936

Tammi Griswold    |    Jul 29, 2010 11:56 PM

Tire cost are a large portion of a fleet maintenance budget and an area that is often neglected. Tire tread depths must be closely matched, tire inflation must be monitored with accurate gauges, and a master gauge needs to be available for calibration. Tires that are 20% low on pressure need to be pulled. If there are no spares that match a dual tread depth, installing two new recaps, and marking the dread depth on the good tire that was pulled is necessary in order to make it easy for folks to identify and match dual tires. A good air regulator a air gage with 1 lb graduations is easy to set up for techs. Front end, (toe alignment), tie rod, drag link, "U" bolts, and king pins must be checked at every PM inspection. Toe alignment should be checked at least annually. A good tire maintenance program also increases casing life and retread numbers. Yes, it takes effort, attention to details, and good support and leadership to not only get the process in place, but to also ensure that it is being carried out. A 10% to 20% saving in tire costs are well worth the time.

Fred    |    Jun 06, 2010 03:00 PM

Maintaining a fleet of tires, keeping treads matched, tread depths aligned, and all the rest poses a tough challenge for the fleet. How many fleets are truly interested in doing this? Several companies make automated or semi-automated systems that help the process (Michelin, Bandag, Squarerigger, Goodyear come to mind). Do they make it easier, faster, and less expensive? Any system must be easy to use and effective, and save enough money to make it worthwhile. Do they? Can a person track more, more accurately, with a lot less effort? Any comments from folks who have used these?

Nathan Walker    |    May 28, 2010 11:44 AM

We have a 1998 AmTran International 3800 at the school i am at, and they mixed the tires. They have "SAMSON" GL74 Tires on the Front, and Double Coin's on the back. Is there any problem to that?

Terry F.    |    May 21, 2010 03:01 PM

Post a comment

Related Stories

Premium Member

Get bus sales numbers, transportation statistics, bus specifications, industry survey results, bus loading and unloading fatality statistics and more in the School Bus Fleet Research Center. Become a premium member today!
Log in Button Register Button


Get breaking news, industry updates, product announcements and more.