Safety

Adding Electronic Stability Control to School Buses Is a Step in the Right Direction

James Blue
Posted on August 16, 2018
Electronic stability control still isn’t required on school buses in the U.S., so adding the safety technology is still a proactive move. File photo
Electronic stability control still isn’t required on school buses in the U.S., so adding the safety technology is still a proactive move. File photo

As electronic stability control (ESC) comes on board more passenger cars, trucks, and other vehicles on the road, the time is ripe to adopt this powerful safety technology in school buses.

ESC has been required on all new passenger vehicles under 10,000 pounds in the U.S. since 2012.

It’s even required on new school buses in Canada — but not in the U.S.

Now, even without a mandate in the U.S., ESC is becoming standard on many school buses, which is a step toward making pupil transportation even safer.

For those who aren’t yet familiar with the technology, ESC systems have sensors that monitor vehicle movement and steering. They can help mitigate rollover incidents by using automatic computer-controlled braking, and they can aid the driver in addressing severe under-steer or over-steer conditions that can lead to loss of control.

In 2015, the National Highway Traffic Safety Administration (NHTSA) issued a final rule to require ESC systems on heavy trucks and some large buses, such as motorcoaches, but the agency exempted school buses.

During the proposal phase of that rulemaking, some organizations — including the National Transportation Safety Board (NTSB) — called for an ESC mandate for all buses greater than 10,000 pounds, including school buses. But NHTSA found that ESC wasn’t cost-effective for school buses at the time of the rulemaking, and the agency cited federal data showing that most school bus crashes are not rollover or loss-of-control crashes that ESC systems are capable of preventing.

“For these reasons, we will not require school buses to be equipped with ESC at this time,” NHTSA said in the final rule, which was published in June 2015.

Fast forward to late 2016, and the backdrop had changed dramatically. By then, the large school bus OEMs had been offering ESC as an option for a year or more. On Nov. 8, 2016, at the National Association of State Directors of Pupil Transportation Services conference, a NHTSA official said the agency was taking another look at ESC for school buses, although he didn’t elaborate on any plans.

Then on Nov. 21, 2016, six students were killed and more than 30 were injured in Chattanooga, Tennessee, when their school bus went out of control, rolled onto its side, and slammed into a tree. Although we can’t say for sure how the outcome might have differed if the bus had been equipped with ESC, it was precisely the type of crash that the technology is designed to help avoid.

In May of this year, NTSB approved a special investigation report on the Chattanooga crash as well as the November 2016 fatal school bus crash in Baltimore, Maryland. In the report, NTSB reiterated its prior recommendation that NHTSA require stability control systems on all buses with a gross vehicle weight rating over 10,000 pounds.

Other research has validated the effectiveness of ESC. For example, a study released by the Insurance Institute for Highway Safety in 2004 found that, for cars and SUVs, ESC reduced fatal single-vehicle crash risk by about 56%.

A literature review published in the journal Traffic Injury Prevention in 2007 found that ESC reduces fatal single-vehicle crashes in cars by about 30% to 50% and in SUVs by 50% to 70%. Also, ESC decreases fatal rollover crashes by an estimated 70% to 90% regardless of vehicle type, according to the review.

Now, ESC is gaining traction in the school bus industry. IC Bus and Thomas Built Buses have made ESC standard on some of their school bus models. That’s a commendable step to enhance safety for the nation’s schoolchildren.

ESC still isn’t required on school buses in the U.S., so adding the safety technology is still a proactive move. The same goes for school bus operators that adopt lap-shoulder belts in states that haven’t mandated them.

After all, when it comes to safety equipment, it’s a good position to be in when you can say that you went beyond what the government requires.

Related Topics: electronic stability control, NHTSA, NTSB

James Blue General Manager
Comments ( 0 )
More Stories
Hawaii Gov. David Ige (shown center right in red shirt), joined by staff members from school bus service providers Roberts Hawaii and TransPar, and officials from the Hawaii State Department of Education, recognized National School Bus Safety Week with a proclamation ceremony. 
Photo

PHOTOS: National School Bus Safety Week in Pictures

An official ceremony with a work of art, refresher training, and a visit from a mascot were some of the ways school transportation providers and suppliers marked NAPT’s National School Bus Safety Week.

The NCST’s writing committees are seeking subject matter experts and public comment as they prepare for the 2020 Congress. Murrell Martin (shown left) and Bill Loshbough are shown here leading a discussion at NCST 2015.
News

NCST Writing Committees Seek Input

The National Congress on School Transportation’s writing committees are seeking subject matter experts and public comment as they prepare for the 2020 Congress. 

News

Man Accused of Trying to Hijack School Bus

Christopher Martinez of California allegedly steps onto the school bus with students aboard, and says he is driving to a mission, police say. He is charged with attempted carjacking.

Be the First to Know

Get the latest news and most popular articles from SBF delivered straight to your inbox. Stay on top of the school bus industry and don't miss a thing!